Process simulations show that integrating desalination brine processing and heat recovery could make the treatment economically beneficial
Growing demand for electrical infrastructure and semiconductor manufacturing is increasing the need to manage emissions of sulfur hexafluoride (SF6), an extremely potent greenhouse gas. Researchers from Jeonbuk National University have designed and evaluated a process that could use desalination brine to make SF6 treatment more economically viable. Through process simulations, they showed that producing treatment chemicals from brine, recovering valuable products and reusing heat could generate enough revenue to exceed estimated treatment costs.
Image title: Integrating brine waste processing with SF6 treatment reduces costs
Image caption: Researchers evaluated four process configurations combining SF6 incineration, chemical scrubbing, desalination brine processing and heat recovery. The integrated process uses chemicals produced from brine to treat SF6 while recovering valuable products, offering a way to reduce treatment costs and improve resource efficiency.
Image credit: Assistant Professor Sunghyun Cho from Jeonbuk National University
License type: Original Content
Usage restrictions: Cannot be reused without permission
Behind the electric grid upgrades driven by the artificial intelligence boom and the electrification of transport lies an environmental concern: sulfur hexafluoride (SF6), an extremely potent greenhouse gas. SF6 is used in high-voltage electrical equipment for its insulating properties and in semiconductor manufacturing as an etching gas. It can trap about 24,300 times more heat than the same amount of CO2 over 100 years. SF6 is an extremely stable gas that can remain in the atmosphere for nearly 3,000 years. Capturing and properly treating it before release is therefore important to prevent long-term environmental damage.
SF6 is mainly treated through high-temperature incineration, followed by chemical treatment of the resulting gases. Now, researchers led by Assistant Professor Sunghyun Cho at the School of Chemical Engineering at Jeonbuk National University, South Korea, have demonstrated how integrating SF6 treatment with desalination brine processing could enable the recovery of valuable chemicals and improve the economics of the treatment process.
The researchers designed and simulated four process configurations for treating 250 kg of SF6 per hour and evaluated their economic and environmental performance. “The results show that an integrated process can simultaneously address two environmental challenges: sulfur hexafluoride emissions and waste brine generated from seawater desalination,” says Dr. Cho.
This paper was made available online on July 20, 2026, and was published in Volume 573 of the Journal of Cleaner Production on August 2, 2026.
The first configuration used conventional incineration followed by a single chemical scrubbing stage, while the second introduced multiple treatment stages to capture and recover useful salts, including calcium fluoride, gypsum and sodium carbonate. The third configuration used processed desalination brine to produce the chemicals needed for SF6 treatment. It also enabled the recovery of additional products, including magnesium hydroxide, hydrogen and chlorine. The fourth configuration built on this approach by incorporating a heat-exchange network to recover and reuse heat within the process.
The economic analysis, which compared the annual costs of SF6 treatment with the revenue from recovered products, showed that integrating desalination brine processing could generate enough revenue to offset treatment costs. Conventional treatment had a levelized cost of US$13.95 per kg of SF6 destroyed, which fell to US$3.25 per kg with multiple scrubbing stages. Processing desalination brine to produce treatment chemicals and recover additional valuable products reduced the cost to −US$2.32 per kg. This negative value indicates that the revenue from recovered products exceeded the estimated annualized treatment costs. A heat-recovery system improved the result further, bringing the cost to −US$4.01 per kg while reducing heating and cooling demands by 56.15% and 63.74%, respectively.
The life cycle assessment showed that all four configurations reduced the global warming impact by more than 99.8% compared with releasing SF6 directly into the atmosphere. The heat-integrated system also achieved net-negative emissions when powered by an electricity mix containing 35% renewable energy.
The evaluations show that turning desalination waste into a resource could make SF6 treatment more economically and environmentally sustainable. As Dr. Cho explains, "Rather than treating greenhouse gas emissions and saline wastewater as separate environmental problems, the proposed system offers a practical framework for integrating waste treatment, resource recovery, and chemical production within a circular industrial network.”
[Reference]
Title of original paper: Synergistic SF6 abatement and desalination brine valorization for valuable resource recovery: Techno-economic and environmental assessment
Journal: Journal of Cleaner Production
DOI: https://doi.org/10.1016/j.jclepro.2026.148950
[About the author] PURE Author Profile
Dr Sunghyun Cho is an Assistant Professor in the School of Chemical Engineering at Jeonbuk National University, South Korea, where he leads the Process Intelligence & Design Laboratory (PID Lab). Previously, he conducted postdoctoral research at Harvard University. His expertise spans process systems engineering, artificial intelligence, process simulation and optimization, techno-economic analysis, and environmental assessment, including life cycle assessment. His research focuses on sustainable chemical processes, carbon capture, utilization, and storage, hydrogen and ammonia energy systems, and industrial resource recovery. He aims to develop economically viable and environmentally sustainable technologies that accelerate the transition toward carbon-neutral industrial systems.